CIS CHEM FLOW 112 IS SNF based super plasticizing
admixture having water reduction capacity up to 20% for
structural concrete PQC
Great effect in dispersion even in mixes with high fines high
workability for longer periods lower pumping pressure
resistance to sagrigation even at high workability extended
setting with longer workability reduces wate content for a
given workability can be achive 26 – 28% water reduction
with optium dosage of admixture reduce rate of workability
loss normally associated with super plasticizer reduces
shrinking cracking because of lower water content ratio
makes the concrete water imermable higher ultimate
strength incrased ease in finishing concrete
CIS CHEM FLOW 112 facilitates excellent water reduction,
with optimum cohesion and workability as required, just by
adjusting the dosage. It is used mainly to the following
types of concrete:
CIS CHEMFLOW 112 SNF based super plasticizer admixture having water retention capacity uo to
20%
. CIS CHEM FLOW 112 provides the following beneficial properties:
Composition |
Modified Naphthalene Formaldehyde Sulphonate |
Packaging |
220 KG |
Appearance / Colour |
Light brown to brown liquid |
Shelf life |
12 months from date of production if stored properly |
Storage conditions |
Store in undamaged, unopened, original sealed packaging in dry
conditions at temperatures between +5 °C and +45 °C. Protect
from direct sunlight and frost |
Density |
1.20 ± 0.05 kg/l at 30 0C |
Total chloride ion content |
Nil (EN 934-2) |
Concreting guidance |
The standard rules of good concreting practice for production
and placing must be observed when using CIS CHEM FLOW 110
in concrete. Refer to relevant standards.
Fresh concrete must be cured properly especially at high
temperatures in order to prevent plastic and drying |
Recommended dosage |
0.4 - 2.0 % by weight of binder
Higher dosages by weight of binder can be used depending on
the mix design, raw materials, climatic conditions and concrete
requirements. Trial mixes must be performed to establish the
exact dosage rate required. |
Compatibility |
CIS CHEM FLOW 110 may be combined with all types of Portland
cement We recommend to perform trial mixes to establish the
required performance when combined with the above products.
Please consult our CIS Technical Department. |
CIS CHEM FlOW 110 should not be swallowed or allowed
to come into contact with skin and eyes.
Suitable protective gloves and goggles should be worn. Splashes on the skin should be
removed with
water. In case of contact with eyes it shall be rinsed immediatewith plenty of water and
medical advice
sought immediately. If swallowed, medical attention shall be sought immediately.
Vomiting should not
be used.