CIS MPC 121 Is modrate to high range of water
reducing agent for concrete CIS MPC 121 is a
polycarboxylate ether based superplasticizer and a
new type high range water reducing admixture for
concrete grades from M- 20 to M- 60. CIS MPC 121 is
designed to provide good work ability without
sagration conforming to ASTM C-494 type G ,C-1017
and IS 9103:2003.
Composition |
Modified Naphthalene Formaldehyde Sulphonate |
Packaging |
220 KG |
Appearance / Colour |
Light brown to brown liquid |
Shelf life |
12 months from date of production if stored properly |
Storage conditions |
Store in undamaged, unopened, original sealed packaging in dry
conditions at temperatures between +5 °C and +45 °C. Protect
from direct sunlight and frost |
Density |
1.20 ± 0.05 kg/l at 30 0C |
Total chloride ion content |
Nil (EN 934-2) |
Concreting guidance |
The standard rules of good concreting practice for production
and placing must be observed when using CIS CHEM FLOW 110
in concrete. Refer to relevant standards.
Fresh concrete must be cured properly especially at high
temperatures in order to prevent plastic and drying |
Recommended dosage |
0.4 - 2.0 % by weight of binder
Higher dosages by weight of binder can be used depending on
the mix design, raw materials, climatic conditions and concrete
requirements. Trial mixes must be performed to establish the
exact dosage rate required. |
Compatibility |
CIS CHEM FLOW 110 may be combined with all types of Portland
cement We recommend to perform trial mixes to establish the
required performance when combined with the above products.
Please consult our CIS Technical Department. |
CIS CHEM FlOW 110 should not be swallowed or allowed
to come into contact with skin and eyes.
Suitable protective gloves and goggles should be worn. Splashes on the skin should be
removed with
water. In case of contact with eyes it shall be rinsed immediatewith plenty of water and
medical advice
sought immediately. If swallowed, medical attention shall be sought immediately.
Vomiting should not
be used.